Archive for the 'Wireless' Category

Information about 3Com Default Passwords Part I

Thursday, March 11th, 2010

Here is a list of default passwords of several hardware and software that we may use. Vendor : 3COM Model : CoreBuilder Version : 7000/6000/3500/2500 Connection Type : Connection Type : Telnet Username : debug Password : synnet Popular Tags for the article:3com 4200g default password, 3com 4200 default password, 3com 4200g password, 4200g default [...]

The Easy Way to Configure Motorola Canopy Backhaul

Saturday, October 3rd, 2009

Motorola Canopy is one of Radio Wireless devices are good enough that no field current. For the purposes of backhaul, the equipment is not much. Only the following radio antenna and power supply already in the system Adapator using PoE (Power over Ethernet). Motorola Canopy equipment is connected to the LAN network through RG-45 connector [...]

Speed Up Your Wireless Internet Connection with Access Your Motorola Canopy

Tuesday, September 1st, 2009

There is have Two Ways to access your Smart Bro Motorola Canopy Page: First and Easy Way: 1. In Windows XP, go to Control Panel then to Network Connections. Look for Local Area Connection which is your SmartBRO connection. In Windows Vista, it’s slightly different, you either go to Control Panel, then to Network and [...]

Tips to Start Wireless Zero Connection (WZN)

Saturday, January 31st, 2009

Sometimes when we trying to connect my laptop to wireless access point, we get a message like this : “Wireless cannot configure this wireless connection. If you have enabled another program to manage this wireless connection, use that software. If you want windows to configure this wireless connection, start the wireless zero configuration (WZC). For [...]

Top 10 Tips to Secure Your WiFi Networks

Thursday, January 15th, 2009

1 : Change Default Administrator Usernames and Passwords Most routers or access points come enabled with a default set of username/password combinations. These combinations are well documented and available online for hackers to use. If a hacker can access your device’s administrative pages they can modify the configuration and control all aspects of your device. [...]

RJ-11 Pinout for Motorola Canopy Sync Cable

Wednesday, November 26th, 2008

An RJ-11 connectors are commonly used to connect a devices to phone lines. The Canopy system uses a utility cable with RJ-11 connectors between the AP or BH and synchronization pulse. The fourth pair is not used. Presuming CAT 5 cable and 6-pin RJ-11 connectors, the wiring of the cable for sync : Popular Tags [...]