Download the application and then
# tar -zxvf X-Lite_Install.tar.gz
# cd xten-xlite
# chmod +x xtensoftphone
#./xtensoftphone

It will give an error:

./xtensoftphone: error while loading shared libraries: libstdc++.so.5: cannot open shared object file: No such file or directory

It requires the libstdc++.so.5 so install it via apt:
# apt-get install libstdc++5
# apt-get install alsa-oss

but I must say that this runs on Ubuntu 8.10 hardy.
Meanwhile, when I use Ubuntu LTS 10.04.2, can not function when an error occurs

sudo apt-get install libstdc + +. so.5
[sudo] password for zullfree:
Reading package lists … Done
Building dependency tree
Reading state information … Done
E: Couldn’t find package libstdc + +. so.5

So I try to look for other alternatives SIPPhone software and I found QuteCom.
The install is easy as it’s part of the Ubuntu Community Software (Universe) and that means it can be installed via apt-get, Software Center or Synaptic.

Qutecom configuration

The QuteCom interface seems quite workable as well as having a number of other instant messaging options available.

Popular Tags for the article:

Related posts:

1. Tips to Uninstalling Software on Ubuntu
2. Install Driver WiFi Acer Aspire 4315 di Ubuntu Hardy Heron
3. How to Install GNS3 as Cisco Simulator in Ubuntu

1. INSTALLATION

Ignore this file if you have a pre-installed binary package.

1a. SIMPLE INSTALLATION

If you do not need to modify the default configuration, then take
the following steps to build and install the server:

$ ./configure
$ make
$ make install

Note that as of 1.0.0, the location of the dictionary files has
changed, to /usr/local/share/freeradius/dictionary. Please ensure
that /etc/raddb/dictionary is THE SAME as ./raddb/dictionary. If not,
you will have to copy it over by hand;

$ cp ./raddb/dictionary /etc/raddb/dictionary

If you see errors like ‘invalid keyword “ATTRIB_NMC”‘, then you
should update the main dictionary file as described above.

Once the main dictionary file has been updated, and the server has
been verified to work, all of the other (old) dictionary files in
/etc/raddb may be deleted.

1b. CUSTOM INSTALLATION

FreeRADIUS has autoconf support. This means you have to run
./configure, and then run make. To see which configuration options
are supported, run ‘./configure –help’, and read it’s output. The
following list is a selection from the available flags:

–enable-shared[=PKGS] build shared libraries [default=yes]
–enable-static[=PKGS] build static libraries [default=yes]
–enable-fast-install[=PKGS] optimize for fast installation [default=yes]
–with-logdir=DIR Directory for logfiles [LOCALSTATEDIR/log]
–with-radacctdir=PATH Directory for detail files [LOGDIR/radacct]
–with-raddbdir=DIR Directory for config files [SYSCONFDIR/raddb]
–with-threads Use threads, if available. (default=yes)
–with-snmp Compile in SNMP support. (default=yes)
–disable-ltdl-install Do not install libltdl
–with-experimental-modules Use experimental and unstable modules. (default=no)
–enable-developer Turns on super-duper-extra-compile-warnings
when using gcc.
–with-edir Compile with support for Novell eDirectory
integration.

Now type “make”. The binaries will be compiled.

Then do “make install”. That will install the binaries, the ‘man’
pages, and MAY install the configuration files. If you have not
installed a RADIUS server before, then the configuration files for
FreeRADIUS will be installed. If you already have a RADIUS server
installed, then FreeRADIUS WILL NOT over-write your current
configuration. It will warn you about the files it could not install.

If you DO see a warning message about files that could not be
installed, then you should manually ‘diff’ the files. There MAY be
changes in the dictionary files which are REQUIRED for a new version
of the software. These files will NOT be installed over your current
configuration, so you MUST verify and install any problem files by
hand.

It is EXTREMELY helpful to read the output of both ‘configure’,
‘make’, and ‘make install’. If a particular module you expected to be
installed was NOT installed, then the output of the
‘configure;make;make install’ sequence will tell you why that module
was not installed. Please do NOT post questions to the FreeRADIUS
users list without carefully reading the output of this process.

2. RUNNING THE SERVER

If the server builds and installs, but doesn’t run correctly, then
you may use debugging mode to figure out the problem.

This is your BEST HOPE for understanding the problem. Read ALL of
the messages which are printed to the screen, the answer to your
problem will often be in a warning or error message.

We really can’t emphasize that last sentence enough. Configuring a
RADIUS server for complex local authentication isn’t a trivial task.
Your ONLY method for debugging it is to read the debug messages, where
the server will tell you exactly what it’s doing, and why. You should
then compare its behaviour to what you intended, and edit the
configuration files as appropriate.

If you don’t use debugging mode, then you will look dumb when you
ask questions on the ‘freeradius-users’ list, and the answer to your
question was contained in the debug messages you posted to the list.

Since the main developers of FreeRADIUS use debugging mode to track
down their configuration problems with the server, it’s a good idea
for you to use it, too. If you don’t, there is little hope for you to
solve ANY configuration problem related to the server.

To start the server in debugging mode, do:

$ radiusd -X

You should see a lot of text printed on the screen as it starts up.
If you don’t, or if you see error messages, please read the FAQ:

http://www.freeradius.org/faq/

If the server says “Ready to process requests.”, then it is running
properly. From another shell (or another window), type:

$ radtest test test localhost 0 testing123

You should see the server print out more messages as it receives the
request, and responds to it. The ‘radtest’ program should receive the
response within a few seconds. It doesn’t matter if the
authentication request is accepted or rejected, what matters is that
the server received the request, and responded to it.

You can now edit the ‘radiusd.conf’ file for your local system.
Please read the ENTIRE file carefully, as many configuration options
are only documented in comments in the file.

Configuring and running the server MAY be complicated. Please read
the documentation in the doc/ directory for further information. If
you have any issues, the FAQ is also a good place to check.

Popular Tags for the article:

Related posts:

1. Installing a VPS with Ubuntu Server 8.04 LTS (Hardy Heron) for Drupal 6.x
2. Tips Installing LTSP on Ubuntu Desktop System
3. Tips to Setup NIS Server with OpenBSD

1. Download package

Download the package sqstat from samm.kiev.ua.

2. Extract Packs

# Gunzip-1.20.tar.gz sqstat
# Tar-xvf sqstat-1.20.tar

3. Move Folder to a webserver

Sqstat-1:20 # mv /var/www/html/: cd/var/www/html

4. Changing Names

# mv sqstat-1.20 sqstat

5. Configuration sqstat

# Cd sqstat
# Cp config.inc.php config.inc.php.defaults
# Vi config.inc.php

In the config.inc.php file, change the IP address & port of squid to the IP Address & port squid ours. For example, as an example:

/* Squid proxy server ip address or host name */
$squidhost[0]=”192.168.0.250″; /* Squid proxy server port */
$squidport[0]=3128;

After that we will change the file squid.conf

# vi /etc/squid/squid.conf

In the file, add the following script:

acl manager proto cache_object
acl webserver src 192.168.0.250/255.255.255.255
http_access allow manager webserver
http_access deny manager

6. Restart Webserver

# service httpd restart

7. Test sqstat
Open the browser and then type:

http://ip_address/sqstat

Then there will be display as follows:

Change Auto refresh from a value of 0 to 5 for this application can be refreshed every 5 seconds and press the Update button.

6. Troubleshooting
Generally what happens is an error during testing sqstat in a browser that is no error statement:

SqStat error
Error (1): Cannot get data. Server answered: HTTP/1.0 403 Forbidden

This may happen because we are wrong to place the script: http_access deny manager in squid.conf file. Put the script at the bottom section on the item http_access.

If no display image as above, but just a list it in your browser, then type:

# mv sqstat.php index.php

Source : www.catatanlepas.com

Popular Tags for the article:

Related posts:

1. Instalasi Squid di Red Hat Fedora Core 1
2. Tips for Set Up an OpenVPN Server
3. Tips to Setup NIS Client with OpenBSD

At first glance both products are no different from most other anti-virus. Users will be offered a number of functions ranging from prevention of malware protection, parental controls, and more.

However, if traced further, there are some differences which claimed Trend Micro is not found in other products. As with the introduction of types of threats in circulation.

With the new malware is about 1.5 per second, Trend Micro offers nonstop updates reputation in cloud computing. System where the introduction of the latest threats cloud-based, trusted by Trend Micro as the perfect solution for users stay safe as it is very actual. In addition, users also do not mess around anymore with hard disk capacity continues to undermined the conventional anti-virus applications.

In addition to these modes, other factors that this product is claimed to be better than its competitors is a small computer resource usage. Yes, Trend Micro claims this product can adjust the power requirements are available.

For example, when users are playing games that are usually ‘eat’ all the power PCs. So anti-virus automatically this will reduce their activities, whether it updates the database, or even scanning files.

“Trend Micro Titanium is more intelligent. It can adapt itself to the conditions of computer usage,”

Related posts:

1. Avira Premium Security Suite 10, More Easily and Actively “Protect” User
2. Info 7 Advantages Tablet PC Samsung Galaxy Tab
3. Facebook News Feed “Full” with Harmful Software

In addition to overhauling the look Avira 10, anti-virus companies from Germany will also come with the latest security stance. Users also can join a community of Avira, and send samples of harmful alien files to be further investigated.

Well, a product called Avira Premium Security Suite 10 is basically not a lot of changes in the design of anti-virus. The formula is still the same.

Easy Installation Process

Install a security software that protects the system from malware sometimes feel complicated and confusing. Such as in BitDefender Total Security 2010 and Trend Micro Internet Security Pro (version 3) the installation feels a bit more ‘most bureaucratic’.

Fortunately, the latest products Avira Premium Security Suite is not the case, with a new look installation process went smoothly and only three clicks, the installation process is complete.

Some of ‘Umbrella’ Avira Premium Security Suite 10

Perhaps the most notable change this time is a feature called Proactiv, which serves to identify the potential threat by monitoring the user’s own application.

Not only that, anti-virus also has a new feature that allows the ability Generic Repair. With these capabilities, Avira not only remove viruses, trojans or malware, but also repair damage caused by malware.

In addition, the Premium Security Suite version is still maintaining their firewall technology. Although impressed ‘fussy’ as many times requested permission to users when an application is working, Firewall Avira proven effective.

This is because of features that offer the option of automatically trust the certification by a vendor code, which is in the list Avira. Thus users need not bother anymore to press the ‘OK’ when Avira ‘chatty’.

To issue an e-mail, Avira Premium Security Suite 10 can also perform scanning, either POP3 or IMAP to prevent malware that is often ride in our email.

The rise of pornography made many anti-virus companies competing to innovate in terms of parental web control. Likewise with Avira, and for setting parental control anti-virus is relatively easy compared to some other brands.

Related posts:

1. Advantages of Titanium Internet Security and Titanium Maximum Security
2. Facebook News Feed “Full” with Harmful Software
3. Free Norton Security Scan with Google Pack Software

IE 9 is a big release. It’s a complete overhaul of what Internet Explorer (Internet Explorer) was, and Microsoft is very focused on beautifying the web. IE 9 is faster, has better support for HTML5 and CSS3, and seems better-tuned to the needs of the user than previous versions did.

Microsoft says that IE9 is a reinvention of the browser. It not only includes greater HTML5 and web standard compliance, but also the ability to turn any website into an application on the Windows (Windows) taskbar. Thee websites are pinned to the taskbar, providing users with a one-click option to a their favorite websites. It also includes Windows 7’s jump lists; any website that supports them will provide a quick menu to its most popular webpages.

The focus of IE9 is on the “regular consumer,” which may irk those of us who generally have more than 10 or 20 tabs open at any given time. Tabs appear on the right side of the address bar, decreasing the amount of real-estate for tabs. To help decrease tab overload, they are grouped based on different websites within the taskbar.

There’s a lot to like about IE 9. Taking UI cues from Google Chrome (Google Chrome), Microsoft has streamlined the interface, making the browser less apparent and allowing the user to focus more on content. Likewise, the addition of pinned websites makes accessing frequently accessed bookmarks faster and adds some great features by way of jump lists.

Crashes and irregularities aside, IE 9 is a great direction for Microsoft and its one we hope it is a path the company continues to walk down.

Check out this video that highlights some of the newest features and pits IE 9 against Firefox (Firefox) and Google Chrome.

And the IE9 beta is available for download today on the BeautifytheWeb site Microsoft has launched as part of its promotional campaign.

Related posts:

1. Microsoft Offers Online Versions of Office 2010 for Free
2. WebP Image Format Developed by Google as a ‘Replacement’ for JPEG
3. Technical Preview of Kaspersky Anti-Virus for Windows 7 has been Released